A+ 220-301 试题库由资深IT认证讲师和 A+ 产品专家结合 PROMETRIC 或 VUE 的真实考试环境最新原题倾心打造.
题库覆盖了当前最新的真实考题，并且全部附有正确答案，我们承诺题库对 A+ 220-301(A+ CORE HARDWARE(2003 Objectives))考试原题完整覆盖.220-301 题库 助您轻松通过认证考试，一次不过全额退款.
1．Which of the following components found on a motherboard is the most visible?
A. Keyboard connector
B. BIOS chip
C. Expansion slots
D. Power connectors
Answer: C
2．Which of the following BEST describes the difference between the "baby" AT and
ATX motherboards?
A. The "baby" AT motherboard allows for the installation of more than two fulllength
expansion cards whereas the ATX motherboard allows for only one or two.
B. The processor, memory, and expansion slots are all in line with each other on a "baby"
AT motherboard, whereas the ATX motherboard has the processor and memory slots at
right angles to the expansion cards.
C. The ATX motherboard allows for the installation of more than two fulllength
expansion cards, whereas the "baby" AT allows for only one or two.
D. The "baby" AT motherboard has a 20pin
power connector while the ATX has a
12pin
power connector.
Answer: B, C
3．The new KillTest .com traineetechnician
wants to know what the length of a
typical memory slot is. How will you reply?
A. 1 inch
B. 2 inches
C. 3 inches
D. None of the above
Answer: C
4．Which of the following memory module form factors are commonly used for
laptops?
A. Dual Inline Memory Modules (DIMMs)
B. Small Outline DIMMs (SODIMMs)
C. Single Inline Memory Modules (SIMMs)
D. Rambus Inline Memory Modules (RIMMs)
Answer: B
5．Which of the following are the three MOST popular socket types? (Choose three)
A. Socket 7
B. SECC
C. Socket 6
D. Socket 5
Answer: A, B, D
6．Which two of the following connector types support Pentium 75+ OverDrive?
(Choose two)
A. SECC (Type II)
B. Socket 7
C. Socket 1
D. Socket 5
Answer: B, D
7．Which of the following connector types support 486 SX/SX2 and 486 DX/DX2
processors? (Choose three)
A. Socket 7
B. Socket 3
C. Socket 2
D. Socket 5
E. Socket 1
Answer: B, C, E
8．Which of the following is the connector type that supports the
Pentium Pro processor?
A. Socket 7
B. Socket 5
C. Socket 8
D. SECC (Type I)
Answer: C
9．Which of the following is the connector type that supports the Pentium II
processor?
A. Socket 5
B. SECC (Type I)
C. Socket 7
D. SECC (Type II)
E. Socket 8
Answer: B
10．Which of the following is the type of connector that supports the Pentium III
processor?
A. Socket 5
B. SECC (Type I)
C. Socket 7
D. SECC (Type II)
E. Socket 8
Answer: D
11．Which of the following uses a Socket 3 connector type?
A. 486 DX4
B. Pentium II
C. Pentium 60
D. Pentium 133
Answer: A
12．Besides 72pin
SIMMs, which of the following describes another size that it comes
in?
A. 30pin
B. 144pin
C. 168pin
D. 184pin
Answer: A
13．The new KillTest .com traineetechnician
wants to know which of the following
represents the sizes of Single Inline Memory Modules (SIMMs). How will you reply?
A. 30pin
B. 168pin
C. 184pin
D. 144pin
E. 72pin
Answer: A, E
14．The new KillTest .com traineetechnician
wants to know what the amount of
connector pins found on a Rambus Inline Memory Module (RIMM). How will you
reply?
A. 30
B. 72
C. 184
D. 144
E. 168
Answer: C
15．Which two of the following describes the number of pins normally associated with
Dual Inline Memory Modules (DIMMs)? (Choose two)
A. 30
B. 72
C. 144
D. 168
E. 184
Answer: D, E
16．How wide is a 72pin
SIMM module?
A. 8bits
B. 16bits
C. 32bits
D. 64bits
Answer: C
17．How wide is a 30pin
SIMM module?
A. 8bits
B. 16bits
C. 32bits
D. 64bits
Answer: A
18．What is the bandwidth supported by a RIMM module?
A. 8bits
B. 16bits
C. 32bits
D. 64bits
Answer: B
19．What is the bandwidth supported by a DIMM module?
A. 8bits
B. 16bits
C. 32bits
D. 64bits
Answer: D
20．What is the bandwidth supported by a 200pin
SODIMM module?
A. 8bits
B. 16bits
C. 32bits
D. 64bits
Answer: D
21．Which of the following has 184pins
and is 16bits
wide?
A. SIMMs
B. DIMMs
C. RIMMs
D. SODIMMs
Answer: C
22．Which of the following are different types of Dynamic Random Access Memory
(DRAM)?
A. Direct Rambus (RIMM).
B. Double Data Rate SDRAM (DDR SDRAM).
C. Extended Data Out (EDO).
D. Synchronous DRAM (SDRAM).
E. Fast Page Mode (FPM).
F. All of the above.
Answer: F
23．Which of the following is the ColorCode
used for the keyboard Port on a new PC
that uses a miniDIN
6 Connector?
A. Pink
B. Blue
C. Green
D. Purple
Answer: D
24．The new KillTest .com traineetechnician
wants to know what is the ColorCode
used for the mouse Port on a new PC that uses a miniDIN
6 Connector. How will
you reply?
A. Pink
B. Blue
C. Green
D. Purple
Answer: C
25．You are the KillTest .com technician required to do troubleshooting in an
environment that promotes static electricity. Which two of the following could you
do in addition to wearing an antistatic wrist strap?
A. You should use an ESD mat in conjunction with an ESD strap.
B. Touch the ground of the workshop.
C. Touch the metal case of the power supply that is plugged into a properly grounded
outlet.
D. None of the above.
Answer: A, C
26．What are the first two steps that you as the KillTest .com technician should take
when disassembling a customer's computer?
A. Remove the case cover.
B. Remove all cables that are attached to the computer.
C. Move the computer to the work surface.
D. Shut down any running programs and turn the computer off.
Answer: B, D
27．When should you replace the CMOS Battery? (Choose two)
A. If the incorrect date is displayed after each startup.
B. When the CDROM
does not work properly.
C. If the time is wrong every time you switch your computer on.
D. If there is no power going to your power supply.
Answer: A, C
28．You are the technician on call at KillTest .com. A client complains that her time
and date on her desktop computer is constantly wrong, even though she resets it.
Which of the following should repair the problem?
A. A new system board.
B. A hard disk.
C. An installation disk to reinstall
her operating system.
D. A new CMOS battery.
Answer: D
29．Which FRU will you take with you to fix a computer that is not powering on?
(Choose all that apply)
A. A system board.
B. A power supply.
C. A monitor.
D. A power cable.
E. A multimeter.
Answer: B, D
30．Which of the following two questions you would ask a customer first when he
reports a blank monitor? (Choose two)
A. Is the monitor switched on?
B. Did you check the color settings?
C. Have you checked whether the contrast or brightness is turned down?
D. What type of computer do you have?
Answer: A, C
